Current Resolution Is Not Supported? See How To Fix It

Timothy Iyekowa
Timothy Iyekowa - Writer & Editor
7 Min Read

Did you see the word “Current resolution is not supported” on your television screen and want to know what it means and how to fix it, you have come to the right place.

A resolution in this context refers to the number of pixels used to create an image. If the TV doesn’t support the image resolution, it won’t be able to display.

If your TV screen displays the error message “Current resolution not supported,” this guide will explain what it means exactly and how you can fix it.

In this article, you’ll learn what “current resolution is not supported” means. You’ll also learn how to fix the current resolution issue on your TV.

ALSO READ: Bright Spot On TV? See Why And How To Fix It

What Does “Current Resolution Not Supported’ Mean?

Current resolution not supported means that your television cannot display a particular image because of the image size.

A resolution is the number of horizontal and vertical pixels in a TV. Pixels are tiny dots that come together to create an image on the TV screen. More pixels equals a sharper picture and finer details.

The pixels are what make up the images displayed on a television screen. Resolution is described by a number which describes the number of horizontal lines your screen can accommodate, followed by either a “p” or an “i”.

Picture quality is not only dependent on resolution, however, but it is also very significant because it is very noticeable.

And most people can easily tell the difference between a high-resolution TV and one with low resolution but the differences are easier to tell if you sit close to the television.

A high-resolution TV means you can see finer details of the images on the screen, while a lower resolution means not as many details. HD TVs support resolutions of 480p, 720i, 720p, 1080i, and 1080p.

A 1080p has more than twice as many pixels as a 720p TV screen and is the highest resolution for a while now.

A 720p resolution TV has 1280 columns and 720 rows of pixels which is the minimum resolution for high resolution.

So when you see Current resolution is not supported, the error message is just trying to tell you to adjust the resolution of the source image from either a DVD player, Xbox, or cable box so it can fit on your TV.

The TV could have a lower resolution than the computer or Xbox it is connected to and cannot display the image.

The TV and the device connected to it should use the same resolution so the video display is smooth.

ALSO READ: Why Is My YouTube TV Blurry? See How To Fix It

How To Fix Current Resolution Is Not Supported

When you see “Current resolution is not supported” on your TV screen, you would have to change or adjust the resolution so the image can be displayed on the TV. Put your television on and navigate the TV with your remote.

Note that some menu options and buttons may not be the same on all TVs but the steps are the same. Follow these steps to adjust your TV resolution:

Step 1: Select Settings

On your TV remote, Press the Home button and select the Settings or Menu button

Step 2: Select Resolution

After clicking on the Settings button, a menu is displayed on the TV screen. Select Resolution or Output Resolution.

Keep in mind that it may also be under the Display, Setup, Aspect Ratio, or Picture mode menus, so check there if you cannot easily locate Resolution or Output Resolution. 

Step 3: Select A Resolution Of Your Choice

Under the Resolution or Output Resolution, you should see a list of different resolutions your TV offers such as 720p, 1080p, and 480p.

Select the resolution of your choice. Usually, the best resolution to pick is the one with the highest available resolution.

To confirm your choice, click on Yes when the pop window asks if you are sure of your choice.

Step 4: Exit Settings

Exit the settings menu. Your TV will re-adjust the resolution either automatically or after exiting. You can always go back and re-adjust the resolution based on whatever device is connected to the TV.


If you see the Current resolution not supported on your TV screen, do not worry. This guide details what it means and how to fix it to ensure a smooth image display.

You need to make sure that the device your TV is connected to and your TV both have the same resolution so video output is good.

ALSO READ: Element Roku TV Black Or Dim? See How To Fix It

Frequently Asked Questions

What Does The Current Resolution Not Supported Mean?

The current resolution is not supported means that your TV cannot display the image you are trying to put on the TV screen. 

What Is 1080p Resolution?

A High Definition TV with 1080p resolution is composed of two million pixels (1920 x 1080).

Is The TV Screen Size The Same As The Resolution?

The TV screen size is the physical measurement of the diagonal section of the screen. It is usually measured in inches whereas the resolution number of horizontal and vertical pixels in a TV.

Share This Article
By Timothy Iyekowa Writer & Editor
As a seasoned content writer with 4+ years of experience in consumer technology, Timothy has been a dedicated author and editor at since its inception. Specializing in addressing user concerns, his articles offer effective solutions for Android, iOS, Windows, and Mac-related issues. Timothy's expertise also extends to crafting content about social media and various applications. Through his daily articles, he consistently aids users in overcoming their technology challenges.
Leave a comment